• New product

Description

The construction of the micro hydraulic cylinders of the LP series is designed using pressing processes. This provides an advantage in series production to rotate the inputs.

The design is very short and compact. LP2010 and LP2512 have a rear cover with a hole for a pin and a piston rod with an external thread. LP2516, LP3220 and LP4024 have an internal thread on both sides for connecting the required mounting parts. (eg ball pin or screw pin).

The roller provides continuous operation up to a speed of 0.1 m / s. Due to cost and size savings, the roller cannot be disassembled. Under the right operating conditions, 100,000 double strokes can be achieved.

The O-ring / glyd-ring built into the piston provides an excellent opportunity to keep the position of the piston under pressure for a long time. The maximum operating pressure is 160 bar.

During series production, the cylinder can also be equipped with other sealing solutions, depending on the specific application.

minimum order 20 pieces


Choose file  File types: png|jpg|jpeg|pdf|doc|docx|xls|xlsx
Choose file  File types: png|jpg|jpeg|pdf|doc|docx|xls|xlsx
Choose file  File types: png|jpg|jpeg|pdf|doc|docx|xls|xlsx
Refresh the code
 

Data sheet

Reference
1343
Mass
0.57 kg
Designation
LP-2010-0120-3
Viscosity
12~230mm2/s
Temperature range
-10~80°C
Work pressure
160.0 bar
Execution
Molded construction
Piston diameter
20.0 mm
Piston rod diameter
10.0 mm
Damping
No damping
End of piston rod
Thread M8x1
Mounting
Flail
Stroke
120.0 mm

3 other products in the same category:

Product added to compare.