• New product
KAP11

KAP11-C0-S-1,3-B0-GL1 - hydraulic pump with external gearing for mini units / 1,3

Geometric volume: 1.3 ccm / rev - Maximum pressure: 230 bar - Direction of rotation: counterclockwise
1 Item
1,500 Kč tax excl.

1,500 Kč tax incl.

Quantity

Add to wishlist

Description

Hydraulic gear pumps with external gearing for mini-aggregates are used for pressure supply of oil medium to the hydraulic system, or only for pumping and filtering oil. The hydraulic gear pump for the mini unit can be in various sizes with the required oil flow of 0.8 - 8 ccm / rev, according to the customer's wishes. These hydraulic pumps with external gearing work with a continuous pressure of up to 230 bar.

Data sheet

Reference
KAP11-S-1,3
Mass
1.3 kg
Designation
KAP11-C0-S-1,3-B0-GL1
Shaft end
Nose 5 mm
Installation center
32.0 mm
Mounting bolt spacing
40x40 mm
Geometric volume of the pump
1.3 ccm / rev
Pump flow at 1500 rpm
1.95 l / min
Maximum speed
6000.0 rpm
Continuous working pressure
230.0 bar
Peak pressure
270.0 bar
Suction port - connection
G 3/8 "
Pressure port - connection
Next to the shaft
Direction of rotation
Left-handed

16 other products in the same category:

MDG-M2S6B microtube pump, 2 l / min, 5.5 bar, IWAKI
IWAKI

MDG-M2S6B

Pump output: max. 2 l / min
Max. Discharge: 5.5 bar
Max. viscosity: 50 mPa.s
pump head: SUS316
gears: CFRPEEK
shaft: stainless steel SUS316
cases: PPS
body: stainless steel SUS316
seal: PTFE
o-ring: EPDM
connection: suction / discharge - female thread 1/8 NPT
With adapter for IEC motor
MDG-M2S6B
Price 21,448 Kč tax excl. 21,448 Kč tax incl.
Out of stock
Product added to compare.