New product

KAP11-C0-D-3,2-B0-GL1 - hydraulic pump with external gearing for mini units / 3,2

Geometric volume: 3.2 ccm / rev - Maximum pressure: 210 bar - Direction of rotation: clockwise

In stock 11 Items

1,500 Kč tax excl.

1,500 Kč tax incl.

Description

Hydraulic gear pumps with external gearing for mini-aggregates are used for pressure supply of oil medium to the hydraulic system, or only for pumping and filtering oil. The hydraulic gear pump for the mini unit can be in various sizes with the required oil flow of 0.8 - 8 ccm / rev, according to the customer's wishes. These hydraulic pumps with external gearing work with a continuous pressure of up to 230 bar.

Data sheet

Reference: KAP11-D-3,2
Mass: 1.3 kg
Designation: KAP11-C0-D-3,2-B0-GL1
Shaft end: Nose 5 mm
Installation center: 32.0 mm
Mounting bolt spacing: 40x40 mm
Geometric volume of the pump: 3.2 ccm / rev
Pump flow at 1500 rpm: 4.7 l / min
Maximum speed: 5000.0 rpm
Continuous working pressure: 210.0 bar
Peak pressure: 250.0 bar
Suction port - connection: G 3/8 "
Pressure port - connection: Next to the shaft
Direction of rotation: Right-handed

16 other products in the same category:

HYDROPRESS s.r.o.

KAP11-C0-S-8,0-B0-GL1

Geometric volume: 8.0 ccm / rev - Maximum pressure: 160 bar - Direction of rotation: counterclockwise

1,500 Kč tax excl. 1,500 Kč tax incl.

4 In Stock

HYDROPRESS s.r.o.

KAP11-C0-D-1,1-B0-GL1

Geometric volume: 1.1 ccm / rev - Maximum pressure: 230 bar - Direction of rotation: clockwise

1,500 Kč tax excl. 1,500 Kč tax incl.

9 In Stock

HYDROPRESS s.r.o.

KAP11-C0-S-5,8-B0-GL1

Geometric volume: 5.8 ccm / rev - Maximum pressure: 190 bar - Direction of rotation: counterclockwise

1,500 Kč tax excl. 1,500 Kč tax incl.

5 In Stock

IWAKI

MDG-M2S6B

Pump output: max. 2 l / min
Max. Discharge: 5.5 bar
Max. viscosity: 50 mPa.s
pump head: SUS316
gears: CFRPEEK
shaft: stainless steel SUS316
cases: PPS
body: stainless steel SUS316
seal: PTFE
o-ring: EPDM
connection: suction / discharge - female thread 1/8 NPT
With adapter for IEC motor
MDG-M2S6B

21,448 Kč tax excl. 21,448 Kč tax incl.

Out of stock

HYDROPRESS s.r.o.

KAP11-C0-D-1,3-B0-GL1

Geometric volume: 1.3 ccm / rev - Maximum pressure: 230 bar - Direction of rotation: clockwise

1,500 Kč tax excl. 1,500 Kč tax incl.

9 In Stock

HYDROPRESS s.r.o.

KAP11-C0-S-1,3-B0-GL1

Geometric volume: 1.3 ccm / rev - Maximum pressure: 230 bar - Direction of rotation: counterclockwise

1,500 Kč tax excl. 1,500 Kč tax incl.

1 In Stock

CASAPPA

PLP10.6,3 D0-30K2-LBB / BA

Geometric volume: 6.61ccm / rev
Maximum pressure: 230 bar
Direction of rotation: clockwise

4,888 Kč tax excl. 4,888 Kč tax incl.

Out of stock

HYDROPRESS s.r.o.

KAP11-C0-S-1,8-B0-GL1

Geometric volume: 1.8 ccm / rev - Maximum pressure: 230 bar - Direction of rotation: counterclockwise

1,500 Kč tax excl. 1,500 Kč tax incl.

3 In Stock

HYDROPRESS s.r.o.

KAP11-C0-D-1,8-B0-GL1

Geometric volume: 1.8 ccm / rev - Maximum pressure: 230 bar - Direction of rotation: clockwise

1,500 Kč tax excl. 1,500 Kč tax incl.

12 In Stock

HYDROPRESS s.r.o.

KAP11-C0-D-5,8-B0-GL1

Geometric volume: 5.8 ccm / rev - Maximum pressure: 190 bar - Direction of rotation: clockwise

1,500 Kč tax excl. 1,500 Kč tax incl.

6 In Stock

IWAKI

MDG-M2S6B220

Pump output: max. 2 l / min
Max. discharge: 5.5 bar
Max. viscosity: 50 mPa.s
pump head: SUS316
gears: CFRPEEK
shaft: stainless steel SUS316
cases: PPS
body: stainless steel SUS316
seal: PTFE
o-ring: EPDM
connection: suction / discharge - female thread 1/8 NPT
Drive: AC220-240V, single phase
MDG-M2S6B220

28,704 Kč tax excl. 28,704 Kč tax incl.

Out of stock