Oils are used as a lubricant or working medium in cars, motorcycles, boats, hydraulic drives, damping systems and other applications where it is necessary to prevent seizing of moving parts. In hydraulic systems, due to their incompressibility, high pressure can be developed and high power can be obtained in a small area. At the same time, the oil lubricates the metal parts, which reduces their wear. The products in our offer are tested in accredited laboratories, which have developed the highest quality for you for the long life of your machines.
Hydrol ® L-HM / HLP hydraulic oils for hydrostatic systems are produced on the basis of high-quality mineral base oils and a set of enriching additives that improve anti-abrasion, anti-corrosion and antioxidant properties.
HV hydraulic oils are produced from high quality petroleum bases and a package of refining additives. They are characterized by high wear resistance and improved viscosity-temperature properties compared to HM-class hydraulic oils.
AGRO UTTO 10W-30 GL-4 Modern special oil of the UTTO type intended for gearboxes, transfer cases, steering gears, wet brakes and hydraulic systems of agricultural and construction machinery.
MOL SP 3 160, MOL Spinol 3 Color: L0.5 (ISO) Density at 15 °C: 0.845 [g/cm3] Kinematic viscosity at 40 °C: 3.2 [mm2/s] Pour point: -15 [°C] Flash point in an open cup (Cleveland): 100 [°C] Neutralization number: 0.58 [mg KOH/g]
MOL SP 3 160, MOL Spinol 3 Color: L0.5 (ISO) Density at 15 °C: 0.845 [g/cm3] Kinematic viscosity at 40 °C: 3.2 [mm2/s] Pour point: -15 [°C] Flash point in an open cup (Cleveland): 100 [°C] Neutralization number: 0.58 [mg KOH/g]
Emulsifying oil for metalworking is produced on the basis of highly refined mineral oil, ionic and non-ionic emulsifiers, corrosion inhibitors and other refining substances. Emulgol ES 12 Does not contain nitrites, chlorine, heavy metals and phenols. In the form of a water emulsion, it is used as a cooling and lubricating liquid in the machining of steel, cast iron and non-ferrous metals and their alloys.
Emulsifying oil for metalworking is produced on the basis of highly refined mineral oil, ionic and non-ionic emulsifiers, corrosion inhibitors and other refining substances. Emulgol ES 12 Does not contain nitrites, chlorine, heavy metals and phenols. In the form of a water emulsion, it is used as a cooling and lubricating liquid in the machining of steel, cast iron and non-ferrous metals and their alloys.
Emulsifying oil for metalworking is produced on the basis of highly refined mineral oil, ionic and non-ionic emulsifiers, corrosion inhibitors and other refining substances. Emulgol ES 12 Does not contain nitrites, chlorine, heavy metals and phenols. In the form of a water emulsion, it is used as a cooling and lubricating liquid in the machining of steel, cast iron and non-ferrous metals and their alloys.
Emulsifying oil for metalworking is produced on the basis of highly refined mineral oil, ionic and non-ionic emulsifiers, corrosion inhibitors and other refining substances. Emulgol ES 12 Does not contain nitrites, chlorine, heavy metals and phenols. In the form of a water emulsion, it is used as a cooling and lubricating liquid in the machining of steel, cast iron and non-ferrous metals and their alloys.
Analysis of a new oil sample for comparison IR (FTIR) spectrum in a cuvette OES-ICP element content (Al,Cr,Cu,Fe,Pb,Sn,Si,Mg,Mo,B,Na,K,Ca,Zn,P,Ni,S) A 20 ml sample of new oil is required